Eye Bolts For Lifting No Shoulder Fully Threaded Shank

Applications

• The receiving hole should be counter-sunk and be free and clear of any debris to assure proper seating.
• LOADS SHOULD ALWAYS BE ALIGNED TO THE PLANE OF THE EYE, not at an angle to the plane. A steel washer or spacer may be used in conjunction with Shoulder Eyebolts to attain proper load alignment. The thickness of the steel washer or spacer must not exceed one thread pitch.
• Angular lifting should be avoided. Angular lifts significantly reduce rated capacities.
• Check seating after applying an angular lift since the initial lift may cause the bolt to back away from the load. If such occurs, the Eyebolt should be unloaded & properly reseated.
• Plain Eyebolt tapped holes are to be threaded for full length engagement of the Eyebolt.
• Plain Eyebolts must have full thread shank engagement, allowing for one-half turn for proper eye-alignment to obtain rated capacities.