This is a demo store. No orders will be fulfilled.
Stainless Slotted Flat Head Vented Machine Screw: 10-24 x 1-3/8
SKU
J30-762-35022
Special Price $3.72 $ 3.72 Regular Price $5.31 $ 5.31
The J30-762-35022 from Industrial Hardware and Specialties is a chemically cleaned, stainless type 18-8, vented flat head machine screw. The vented machine screw is 1-3/8" ( 1.375 ) long with a diameter thread pitch of 10-24 ( UNC-2A ). The Stainless Slotted Flat Head Vented Machine Screw: 10-24 x 1-3/8 requires a slotted drive for installation. The slotted flat head vented machine screw is drilled with a 0.046" hole to allow for trapped gases to escape. It meets fastener standard ANSI/ASME B18.6.3, and thread standard ANSI/ASME B1.1.
Industrial Hardware and Specialties vented caps screws are ideally suited for fastening inside high vacuum (UV), or ultra high vacuum (UHV) equipment as well as other high pressure environments. The Stainless Slotted Flat Head Vented Machine Screw: 10-24 x 1-3/8 comes with a 0.046" hole drilled through it's head. This feature helps to eliminate the possibility of virtual leaks as the hole allows gas molecules to vent into the vacuum system through the top of fastener and out of the system. This vented machine screw is made from stainless steel type 18-8 with a chemically cleaned finish. The J30-762-35022 has a flat head, is 1-3/8" ( 1.375 ) long with a diameter thread pitch of 10-24 ( UNC-2A ). The Stainless Slotted Flat Head Vented Machine Screw: 10-24 x 1-3/8 requires a slotted drive for installation.
| Vendor | InSpec |
|---|---|
| Fastener Type | Vented Machine Screw |
| Fastener Standard | ANSI/ASME B18.6.3 |
| Drive Type | Slotted |
| Head Style | Flat Head |
| Diameter Thread Pitch (in) | 10-24 |
| Thread Class Fit | UNC-2A |
| Length (in.) | 1-3/8 |
| Point Type | Flat or Slightly Concave & Chamfered |
| Material | Stainless Type 18-8 |
| Finish | Chemically Cleaned |
| Thread Standard | ANSI/ASME B1.1 |
| Vent Hole Dia. (Nominal) (in.) | 0.046 |
| Hole Tolerance (in.) | +0.003 / -0.010 |
| Slot Width Range (in.) | 0.060 /0.050 |
| Slot Depth (in.) | 0.053 / 0.034 |
| Head Height (in.) | 0.116 |
| Head Diameter ⌀ | 0.385 / 0.340 |
