This is a demo store. No orders will be fulfilled.
Phillips Bugle Head Laminating Screws 10 x 1-1/2 Phosphate Coated Drywall Screws
The Phillips Bugle Head Laminating Screws 10 x 1-1/2 Phosphate Coated Drywall Screws from Industrial Hardware and Specialties are designed to attach double layerd gypsum board to steel studs. These #10 drywall fasteners are made from steel with a phosphate coating, they have a bugle head and should be installed with a #2 phillips drive. This drywall screw is 1-1/2" long with a they are sold in box sizes of 5000 pcs ( 38 lbs. ). Order today from Industrial Hardware and Specialties.
From Industrial Hardware and Specialties is the Phillips Bugle Head Laminating Screws 10 x 1-1/2 Phosphate Coated Drywall Screws. These Drywall Screws are designed to attach double layered gypsum board to steel studs.This drywall fastener is made of a phosphate coated steel. The phosphate coating is a conversion coating used to add mild corrosion resistance and provide lubricity. Salt sprayed tested to 48 hours, the 355-LAM should be used indoors in dry, non-corrosive applications. These #10 drywall screws have a bugle head, are 1-1/2" long, and should be installed with a #2 phillips drive. You can purchase these drywall fasteners from Industrial Hardware and Specialties in boxes of 5000 pcs ( 38 lbs.).
Strong-Point Phillips Bugle Head Laminating Screws, Phosphate Coated, 10 x 1-1/2, Box of 5,000
- Meets ASTM A 510 for carbon steel manufacturing
Vendor | InSpec |
---|---|
Category | Drywall Screws |
Length (in.) | 1-1/2 |
Surface Coating | Phosphate Coated |
Head Type | Bugle Head |
Drive Type | Phillips |
Drive Size | #2 |
Diameter Ø TPI | #10 |
Application | Attaches double layerd gypsum board to steel studs. |
Box Size | 5000 |