This is a demo store. No orders will be fulfilled.
Phillips Bugle Head 8-18 x 2 #2 Non-Jacking Point Zinc Plated BSD Self-Drilling Screws
The Phillips Bugle Head 8-18 x 2 #2 Non-Jacking Point Zinc Plated BSD Self-Drilling Screws from Industrial Hardware and Specialties are designed to attach wood to metal. These 8-18 self drilling fasteners are made from steel with a zinc plating, they have a bugle head and should be installed with a #2 phillips drive. This type BSD self drilling screw is 2" long with a #2 pilot point, they are sold in box sizes of 3500 pcs ( 31 lbs. ). Order today from Industrial Hardware and Specialties.
From Industrial Hardware and Specialties is the Phillips Bugle Head 8-18 x 2 #2 Non-Jacking Point Zinc Plated BSD Self-Drilling Screws. These Self-Drilling Screws are designed to be used when you need to attach wood to metal.This self-drilling fastener is made of a zinc plated steel. The zinc plating is applied electrically to the fastener providing a protective barrier that helps prevent oxidation. Salt sprayed tested to 24 hours, the 355-D820Z should only be used in indoors or in non-corrosive applications. These 8-18 self drilling screws have a bugle head and should be installed with a #2 phillips drive. The fastener is 2" long with a .035 - .104 drill capacity. The screw is equipped with a #2 point. What sets the 355-D820Z apart from the other self-drilling screws offered is that it has an unthreaded screw section after the self-drilling point. This unthreaded section will act as a pilot point allowing drilling without thread engagement. This feature will prevent separation of the fastened material from the base metal (known as "jacking").You can purchase these self-drilling fasteners from Industrial Hardware and Specialties in boxes of 3500 pcs ( 31 lbs.).
Phillips Bugle Head 8-18 x 2 #2 Non-Jacking Point Zinc Plated BSD Self-Drilling Screws
- Pilot point prevents jacking actions
- Used for attaching 3/4″ lumber or thinner to steel
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
- Meets ASTM F1941 for corrosion resistance
Vendor | InSpec |
---|---|
Category | Self-Drilling Screws |
Length (in.) | 2 |
Surface Coating | Zinc Plated |
Head Type | Bugle Head |
Drive Type | Phillips |
Drive Size | #2 |
Diameter Ø TPI | #8-18 |
Thread Description | BSD |
Drill Point | Non-Jacking Point |
Option | Non-Jacking Point |
Drill Point | #2 |
Drill Capacity | .035 - .104 |
Application | Attaches wood to metal. |
Box Size | 3500 |