N2029-12: 7/8-9 x 12 in Long with 4 in Thread Shoulder Pattern Eyebolt with Nut Carbon Steel - Made in the USA

Provided by Industrial Hardware and Specialties is the N2029-12: 7/8-9 x 12 in Long with 4 in Thread Shoulder Pattern Eyebolt with Nut Carbon Steel - Made in the USA. These 7/8-9 Shoulder Pattern Eyebolt with Nuts have a 12" long shank, with 4" of thread. They feature a 1-3/4" inside diameter for hanging fittings, or hoisting loads. With a rated capacity of 7,200lbs / 3,266kgs when used in straight vertical lifts.When used in non-vertical lifts under 45 degrees the rated capacity is 1,800lbs. Under no circumstances should Shoulder Eyebolts be used for angular lifts greater than 45 degrees. Made in the USA from Drop Forged Carbon Steel Hot Dip Galvanized to ASTM A153.

Eyebolt Rated Capacity Guidelines

• Eyebolts are designed with a 5:1 Safety Factor
• The minimum threaded shank length of Eyebolts must be one thread diameter to attain the rated capacity
• Regardless of the 5:1 Safety Factor, no greater load should be applied to an Eyebolt than the Rated Capacity listed

Knowledge Base

If your looking for more information on Eyebolts checkout the Industrial Hardware and Specialties Knowledge Base