This is a demo store. No orders will be fulfilled.
N2010-SS-12: 1-8 x 12 in Long with 4 in Thread Plain Pattern Eyebolt with Nut SS Type 304 - Made in the USA
N2010-SS-12: 1-8 x 12 in Long with 4 in Thread Plain Pattern Eyebolt with Nut SS Type 304 - Made in the USA
Provided by Industrial Hardware and Specialties is the N2010-SS-12: 1-8 x 12 in Long with 4 in Thread Plain Pattern Eyebolt with Nut SS Type 304 - Made in the USA. These 1-8 Plain Pattern Eyebolt with Nuts have a 12" long shank, with 4" of thread. They feature a 2" inside diameter for hanging fittings, or hoisting loads. With a rated capacity of 10,000lbs / 4,537kgs when used in straight vertical lifts.Plain Eyebolts are not recommended for angular load applications. For angular lifts under 45 degrees shoulder pattern eyebolts should be used instead. Made in the USA from Drop Forged Stainless Steel Type 304 Passivated & Electro-Polished.
Eyebolt Rated Capacity Guidelines
- Eyebolts are designed with a 5:1 Safety Factor
- The minimum threaded shank length of Eyebolts must be one thread diameter to attain the rated capacity
- Regardless of the 5:1 Safety Factor, no greater load should be applied to an Eyebolt than the Rated Capacity listed
Knowledge Base
If your looking for more information on Eyebolts checkout the Industrial Hardware and Specialties Knowledge Base
Product Type | Eyebolt w/nut |
---|---|
Thread Standard | U.S. Standard |
Bolt Diameter-TPI | 1-8 |
Shank Length | 12 in |
ID | 2 in |
OD | 4 in |
Rated Capcity lbs. | 10,000 |
Rated Capcity kg | 4,537 |
Pattern | Plain Pattern |
Material | Drop Forged Stainless Steel Type 304 |
Plating | Passivated & Electro-Polished |
Rated Capacity 46+ | Plain Eyebolts are not recommended for angular load applications. Safety Swivel Hoist Rings are recommended for such applications |
Thread Style | Partial Thread |
Thread Length | 4 in |
Fit | UNC-2A |