| For ease of ordering, Hager has established standard locations for power transfer cutouts. All standard location dimensions are referenced from the top edge of the door to the centerline of the power transfer cutout. Please specify handing. |  |
|
|
| Concealed Electric Through-Wire: • Transfers power discreetly from building to door hardware • Four, eight, or ten 24-gauge wires with 12” wire leads • To order, use symbol “ETW” plus the number of wires required, as a suffix. Example: 790-900 HD 85” US32D ETW-4 • Specify handing and dimension from top of hinge to centerline of electric through-wire location. Please note the clearance from top of hinge to underside of header, typically 1/16” to 1/8” (1.6 mm to 3.2 mm). • Modification available on 790-900 and 790-915 |
 |
| Von Duprin EPT2 or EPT10 Electric Power Transfer Preparation • Hinge leaf cutout to accommodate power transfer device • Specify handing and dimension from top of hinge to centerline of power transfer cutout location. Please note the clearance from top of hinge to underside of header, typically 1/16” to 1/8” (1.6 mm to 3.2 mm). • Modification available on models 790-900, 790-903, 790-904, and 790-915 |
 |
|
Exposed Electric Switches: • Miniature push button switch is incorporated in the hinge frame leaf to monitor position of the door. • Includes three 12” wire leads. • To order, use symbol “E1S” as a suffix. Example: 790-900 85” US32D E1S • Each monitoring hinge only needs one E1S switch. • Specify handing and dimension from top of hinge to centerline of electric through-wire location. Please note the clearance from top of hinge to underside of header, typically 1/16” to 1/8” (1.6 mm to 3.2 mm). • Templates regarding location of contact switch available upon request. • Modification available on models 790-900 and 790-915. |
 |
| Quick Connect: Available for electric through wire option. |
 |
|
Mortar Box - 430
• Serves as a mortar shield. • Overall dimensions are 9” (229 mm) length with tabs, 7” (178 mm) (inside), 1-3/4” x 1-3/4” (45 mm x 45 mm) inside dimension. • Galvanized steel 0.040” (1 mm). • Top and bottom knockouts for standard conduit fittings. |
 |
This is a demo store. No orders will be fulfilled.
