| Trim: |
- Archer, August, Charles, Johnston, Joshua, Louis, Warren, William or Withnell lever with escutcheon
- Pull plate trim (excluding 45PT)
- Rim x optional pull
|
| Covers: |
- Stainless steel, zinc
|
| Cover Tube: |
- Aluminum
|
| End Caps: |
- Standard end cap (zinc)
- OPTIONAL Flush end cap (zinc)
|
| Door Width: |
- 36'' (914 mm) field sizeable to 30'' (762 mm) panic-rated door and 28" (711 mm) fire-rated door
- 48'' (1219 mm) field sizeable to 36'' (914 mm) panic- or fire-rated door
- Reference electrified exit device for door width specifications
|
| Door Height: |
- 7' (2134 mm) - Standard
- 8' (2438 mm) - Optional
- 10' (3048 mm) - Optional
|
| Door Thickness: |
- 1-3/4" (44 mm) - Standard up to 3", except with night latch which is 2-1/2"
|
| Stile Width: |
- 5-3/8" (137 mm) minimum stile width required for single door and 5/8" (16 mm) stop
- 4-7/8" (124 mm) minimum stile width required for double doors
- 4-7/8" (124 mm) minimum stile width required for double door x Rim device with double door strike
- All stile widths are measured from door edge
|
| Fasteners: |
- Wood and machine screws
- Thru-bolts
|
| Rod Length: |
- Rods for 7' (2134 mm) door - Standard
- Rods for 8' (2438 mm) door - Optional
- Door height of 7' (2134 mm) requires 33-1/4" (845 mm) top rod length
- Door height of 8' (2438 mm) requires 45-1/4" (1149 mm) top rod length
- Extension rods kits available, 2' (610 mm) or 3' (914 mm)
|
| Latchbolt: |
- Top - 1/2" (13 mm) throw, Pullman type with automatic dead-latching, stainless steel
- Bottom - 1/2" (13 mm) throw, Pullman type, held retracted during door swing, stainless steel
|
| Push Bar: |
- OPTIONAL Photoluminescent push bar cover available
|
| Strikes: |
- Stainless steel with plated rollers - Included standard with panic devices
- Solid stainless steel - Included standard with fire rated devices
- Surface applied to frame with slotted holes for easy adjustment
- 10' (3048 mm) fire rated device requires strike and hook kit, 4912, for top strike
- Double door strike for use with surface vertical rod and rim device available
|
Finishes:
|
- US3, US4, US10, US10B, US26, US26D, US32D
- Trim is not available in US32D
|
Dogging:
|
- Hex key dogging standard on panic rated devices
- Cylinder dogging is available on panic-rated devices, specify "CD" (3902 1-1/8" (29 mm) mortise cylinder sold separately)
|
Projection:
|
- 3" (76 mm) in undogged position
- 2-5/8" (67 mm) in dogged position
|
Notes:
|
- Center line prep is 40". If door prep elevation is lower, a longer rod will need to be ordered.
- Recommended to be used on appropriately reinforced doors
|
