This is a demo store. No orders will be fulfilled.
Indented Slotted Hex Washer 1/4" AF #8 Head 1/2 OD Sealing Washer 10 x 1-1/2 Zinc Plated Needle Point Screws
The Indented Slotted Hex Washer 1/4" AF #8 Head 1/2 OD Sealing Washer 10 x 1-1/2 Zinc Plated Needle Point Screws from Industrial Hardware and Specialties are designed to attach light gauge sheet metal to medium gauge sheet metal. These #10 needle point fasteners are made from steel with a zinc plating, they have a #8 af hex washer head with a 1/2 neoprene-epdm bonded sealing washer and should be installed with a 1/4" indented slotted drive. This needle point screw is 1-1/2" long with a they are sold in box sizes of 2500 pcs ( 26 lbs. ). Order today from Industrial Hardware and Specialties.
From Industrial Hardware and Specialties is the Indented Slotted Hex Washer 1/4" AF #8 Head 1/2 OD Sealing Washer 10 x 1-1/2 Zinc Plated Needle Point Screws. These Needle Point Screws are designed to attach light gauge sheet to medium gauge sheet metal.This needle point fastener is made of a zinc plated steel. The zinc plating is applied electrically to the fastener providing a protective barrier that helps prevent oxidation. Salt sprayed tested to 24 hours, the 355-NA1024 should only be used in indoors or in non-corrosive applications. These #10 needle point screws have a #8 af hex washer head, are 1-1/2" long, and should be installed with a 1/4" indented slotted drive. You can purchase these needle point fasteners from Industrial Hardware and Specialties in boxes of 2500 pcs ( 26 lbs.).
Strong-Point Slotted Indented Hex Washer Head, Zinc Plated with 1/2" O.D. Bonded Washer, 10 x 1-1/2, 1/4" A.F. #8 Head, Box of 2,500
- Meets ASTM A 510 for carbon steel manufacturing
- Zinc plating meets ASTM B 633 for electrodeposited zinc coatings
- Meets ASTM F1941 for corrosion resistance
Vendor | InSpec |
---|---|
Category | Needle Point Screws |
Length (in.) | 1-1/2 |
Surface Coating | Zinc Plated |
Head Type | #8 AF Hex Washer Head |
Washer | 1/2 Neoprene-EPDM Bonded Sealing Washer |
Drive Type | Indented Slotted |
Drive Size | 1/4 |
Diameter Ø TPI | #10 |
Drill Point | 22° Point |
Application | Attaches light gauge sheet metal to medium gauge sheet metal. |
Box Size | 2500 |