Hex Washer Head- Zinc Plated
- Lengths:3/8"-6"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A hex nut setter or drive socket with torque limiting nose piece set.Do not over torque as it can cause the head to snap or stripping of the threads. Installed fasteners must penetrate a minimum of threefull threads beyond the metal structure. |
Hex Washer Head w/Sealing Washer- Zinc Plated
- Lengths:12"-6"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A hex nut setter or drive socket with torque limiting nose piece set.Do not over torque as it can cause the head to snap or stripping of the threads. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Pan Head- Zinc Plated
- Lengths: 3/8"-3"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
- Meets ASTM F1941 for corrosion resistance
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reducedPhillips drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Flat Head- Zinc Plated
- 1/2"-3"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
- Meets ASTM F1941 for corrosion resistance
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reduced Phillips drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Oval Head- Zinc Plated
- 3/4" - 1-1/2"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
- Meets ASTM F1941 for corrosion resistance
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reduced Phillips drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Bugle Head- Zinc Plated, Phosphate Coated or Ruspert Coated
- Lengths:1"-5"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM C 954 for attaching gypsum board to steel studs
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reduced Phillips Drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Wafer Head- Zinc Plated
- Lengths: 3/4"-2"
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
- Meets ASTM F1941 for corrosion resistance
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Wafer Head w/Wings- Zinc Plated, or Tri-Coated
- Lengths: 1-7/16"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended.Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Modified Truss (R/W) Head- Zinc Plated, Black Oxide
- Lengths: 1/2"-3"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended.Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
#6 Oval Head Sems w/Finishing Washer- Zinc Plated
- Lengths: 3/4" - 1-1/4"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
- Meets ASTM F1941 for corrosion resistance
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #2 reduced Phillips drive bit. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Pancake Head- Zinc Plated
- Lengths: 5/8" - 1-1/2"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Pan Head Framing Screw- Zinc Plated or Phosphate Coated
- Length:7/16"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets ASTM C 954 for attaching track to steel studs
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
- Meets ASTM F1941 for corrosion resistance
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended.Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Flat Head Reamer w/Wings- Zinc Plated or Tri-Coated
- Lengths: 1-5/8" 3-3/4"
- Meets ASTM C 1513 for cold-formed steel framing connections
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2000 RPM drive speed recommended. Do not over torque as it can cause the head to snap or stripping of the recess. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
Trim Head- Zinc Plated or Phosphate Coated
- Lengths:1-5/8" - 3"
- Meets F.I.P.-1000.7 for torsional strength & drill speed
- Manufactured to SAE J78 for dimensional specifications
- Meets ASTM A 510 for carbon steel manufacturing
| Installation Attaches wood or metal to concrete, brick, cement block or masonry.  A standard screw gun with torque limiting nose piece set at a maximum of 2500 RPM drive speed recommended. Use a #1 reduced Square drive bit. Do not over torque as it can cause the head to snap or stripping of the threads. Installed fasteners must penetrate a minimum of three full threads beyond the metal structure. |
-Head-min.png)
