Hager 5100 Series

Get to Know the Hager 5100 Series

What is the Hager 5100 Series?

Featured at Industrial Hardware and Specialties is the Hager 5100 Series Closer. These closers are of the highest quality, constructed from cast iron they are meant for heavy duty applications. The Hager 5100 Series Door Closer can be installed on both exterior and interior doors that are subject to high use and potential abuse.

Stocked with a full rack and pinion operation, and a heat treated steel piston and triple heat treated steel spindle, the Hager 5100 Series Door Closer is made to last. The closers are non-handed to permit installation on doors of either hand. With adjustable sizing from 1 through size 6, these door closers are fully compliant with ANSI A117.1 for Accessibility. Thesedesign features make Hager 5100 Series door closers the ideal choice for doors with a maximum weight of 330 lbs.

To find the best mounting option that fills your needs, consult the table below:

How to Select the Proper Door Closer

1. Size and Weight of Door
5100 Series closers are non-sized so that closing force can be adjusted in the field to accommodate various door sizes, weights, and applications.

2. Interior Application
Where possible, the standard regular arm application should be used as it is the most efficient in terms of power and control.

3. Exterior Application
Exterior doors require greater closing forces because of draft and wind conditions. Therefore, where possible, use an extra heavy duty arm for these applications.

4. Degree of Opening
The closer should permit the door to open far enough to allow for easy traffic flow. The selection of the proper arm and position on the door are very important.

5. Function
Closers can be equipped with special arms that can serve many functions such as hold open, positive stop, or hold open stop when necessary.

6. Abusive Environment
Closers can be equipped with extra heavy duty arms that can withstand vandalism and extreme use.