This is a demo store. No orders will be fulfilled.
Campbell #6423100 Short Leg Structural GX Clamp - 1/16 to 5/8 in. Grip Range - 1/2 Metric Ton WLL
SKU
59A-6423100
Special Price $691.44 $ 691.44 Regular Price $1,029.99 $ 1029.99
The Campbell #6423100 Short Leg Structural GX Clamp - 1/16 to 5/8 in. Grip Range - 1/2 Metric Ton WLL from Industrial Hardware and Specialties is a spring loaded plate clamp that can be used for vertical or horizontal lifts. The Campbell UPC number 020418177330 has a safe working load of a 1/2 metric ton, and a 1/16" to 5/8" grip range. Made in the USA
The Campbell #6423100 Short Leg Structural GX Clamp - 1/16 to 5/8 in. Grip Range - 1/2 Metric Ton WLL is a versatile American Made clamp used mostly for steel warehousing and benchwork. The clamp has a Working Load Limit of 1/2 metric ton and a grip range of 1/16" to 5/8". The Campbell 6423100 must have the short leg under the plate when lifting the plate from horizontal to vertical position.Designed for a secure bite on small or odd shaped, wide flanged beams. The Short Leg Structural GX Clamp always stay in contact with the work face of the load, even when the load is turning through 180 degrees. An exclusive feature of Campbell GX Model Clamps is their wear indicator system. If the cam's teeth are damaged or dulled between the unique wear indicator grooves, it's time to replace the cam. Campbell recommends replacing the pads every time you replace the cam. You can purchase the Campbell #6423100 at Industrial Hardware and Specialties today.
Campbell #6423100 Short Leg Structural GX Clamp - 1/16 to 5/8 in. Grip Range - 1/2 Metric Ton WLL
- Designed for a Secure Bite on Small or Odd Shaped, Wide Flanged Beams
- Can Be Used for Both Vertical and Horizontal to Vertical Lifting Through 180°
- Put Short Leg Under Plate When Lifting From Horizontal to Vertical
- Replacement Parts Are Same As for Standard “GX†Clamps
- Note: The Pad and Cam Should Be Replaced at the Same Time
- Clamps Are 100% Proof Tested and Certificate of Test Suppliedwith Each Clamp
- Minimum WLL of at Least 10% of the Maximum WLL
| Vendor | Campbell® Chain & Fittings |
|---|---|
| Apex Catalog Number | 6423100 |
| UPC | 020418177330 |
| Minimum Grip Width | 1/16 in |
| Maximum Grip Width | 5/8 in |
| Working Load Limit | 1102 lb (1/2 Metric Ton) |
| Dimension A (in.) | 4 in |
| Dimension B (in.) | 9 1/2 in |
| Dimension C (in.) | 2-1/8 in |
| Dimension D (in.) | 2-5/8 in |
| Dimension E (in.) | 2 in |
| Dimension F (in.) | 4-1/16 in |
| Dimension G (in.) | 2-7/8 in |
| Dimension H (in.) | 1-3/8 in |
| Dimension I (in.) | 4-3/4 in |
