This is a demo store. No orders will be fulfilled.
Campbell #5200634 3/8 in. Regular Connecting Links - 2800 lb WLL - Carbon Steel - Galvanized
The Campbell #5200634 3/8 in. Regular Connecting Links - 2800 lb WLL - Carbon Steel - Galvanized from Industrial Hardware and Specialties has a trade size of a 3/8", and a working load limit of 2800 lb. Do Not Exceed Working Load Limit - NEVER Re-Use a Connecting Link.
Provided by Industrial Hardware and Specialties is the Campbell #5200634 3/8 in. Regular Connecting Links - 2800 lb WLL - Carbon Steel - Galvanized. Campbell connecting links are commonly used to connect two chain lengths such as an anchor chain. Be sure connecting links are the same size as the components being used, and ensure you peen the prongs to fill the hole of the paired half as much as possible. Campbell Catalog number 5200634 is a trade size 3/8", therefore must be used with a 3/8" chain. It has a straight line working load limit of 2800 lbs. Make sure any assembly made using these connecting links are rated at the working load limit of the weakest component. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit. Manufactured from Carbon Steel with a Galvanized finish. You can order the Campbell Catalog number 5200634 from Industrial Hardware and Specialties today in increments of 10.
Campbell #5200634 3/8 in. Regular Connecting Links - 2800 lb WLL - Carbon Steel - Galvanized
- Drop-Forged Heat-Treated Carbon or Alloy Steel
- Standard Finish is Self-Colored or Galvanized to Meet ASTMA-153 Specifications
- 4 to 1 Design Factor
- For Proper Closure, Peen the Prongs to Fill the Hole of theMating Half as Much as Possible
- Meets Design Requirements of Federal Specification RR-C271D,Type II
- Make Sure the Connecting Link Used is the Same Size as the Components Being Joined. e.g., a 3/8 in. Connecting Link isUsed with 3/8 in. Chain
- Any Assembly Made Using Connecting Links Should be Rated at the Working Load Limit of the Weakest Component.
- The Working Load Limit of Connecting Links is Based on aStraight Line Pull. Any Side or Shock Loading Will Significantly Reduce the Actual Working Load Limit.
- NEVER Re-Use a Connecting Link
- DO NOT EXCEED THE WORKING LOAD LIMIT
Vendor | Campbell® Chain & Fittings |
---|---|
Apex Catalog Number | 5200634 |
UPC | 020418074721 |
Trade Size | 3/8 in |
Material | Carbon Steel |
Finish | Galvanized |
Working Load Limit | 2800 lb |
Dimension A (in.) | 1-3/8 in |
Dimension B (in.) | 2-1/8 in |
Dimension C (in.) | 9/16 in |
Dimension D (in.) | 1-1/8 in |