This is a demo store. No orders will be fulfilled.
9-15 x 2-1/2 Indented Hi-Hex Washer Head w/Shoulder and EPDM Sealing Washer Quad-Coated Pole Gripper Screws
The 9-15 x 2-1/2 Indented Hi-Hex Washer Head w/Shoulder and EPDM Sealing Washer Quad-Coated Pole Gripper Screws from Industrial Hardware and Specialties are designed to attach metal to wood. These 9-15 pole gripper fasteners are made from steel with a quad-coating, they have a hi-hex washer head w/shoulder with a 304 stainless steel epdm bonded sealing washer and should be installed with a 1/4" indented hex drive. This pole gripper screw is 2-1/2" long with a type s point they are sold in box sizes of 1500 pcs ( 23 lbs. ). Order today from Industrial Hardware and Specialties.
From Industrial Hardware and Specialties is the 9-15 x 2-1/2 Indented Hi-Hex Washer Head w/Shoulder and EPDM Sealing Washer Quad-Coated Pole Gripper Screws. These Pole Gripper Screws are designed to attach metal to wood.This pole gripper fastener is made of a quad-coated steel. The quad-coating is a high-grade metal surface processing technology that prevents corrosion. the coating system constists of four layers: a metallic zinc layer, a hex-chromium passivation, a layer of functional nano coating used as a sealer, and a high-grade anti-corrosion chemical conversion film.Salt sprayed tested to 1000 hours, the 355-PGA940 has held up to 15 cycles of Kesternich testing, and has acid rain protection. An excellent choice for outdoor and high corrosive applications. These 9-15 pole gripper screws have a hi-hex washer head w/shoulder, a Type S Point, are 2-1/2" long, and should be installed with a 1/4" indented hex drive. You can purchase these pole gripper fasteners from Industrial Hardware and Specialties in boxes of 1500 pcs ( 23 lbs.).
Strong-Point Unslotted Indented Hi-Hex Washer Head w/Shoulder and EPDM Bonded Washer, Type S, Strong Shield Coated, 9-15 x 2-1/2, Box of 1,500
- Used in roofing and siding applications
- Bonded washer creates leak proof seal
- ACQ compatible
- Rust/Acid rain protection
- Quad-coating exceeds 1,000/hr. salt spray resistance
- High degree of corrosion resistance
Vendor | InSpec |
---|---|
Category | Pole Gripper Screws |
Length (in.) | 2-1/2 |
Surface Coating | Quad-Coated |
Head Type | Hi-Hex Washer Head w/Shoulder |
Washer | 304 Stainless Steel EPDM Bonded Sealing Washer |
Drive Type | Indented Hex |
Drive Size | 1/4 |
Diameter Ø TPI | #9-15 |
Drill Point | Type S Point |
Application | Attaches metal to wood. |
Box Size | 1500 |