This is a demo store. No orders will be fulfilled.
75 Degree Obtuse (Open) Angle From Steel-E.G. (Zinc Plated) With 3-1/2 in. Leg And 4-Holes
The 75 Degree Obtuse (Open) Angle From Steel-E.G. (Zinc Plated) With 3-1/2 in. Leg And 4-Holes is designed to fasten to or join together sections of all channel ( strut ).InSpec 75 Degree Obtuse (Open) Angle Fittings are made of electro galvanized zinc plated steel to handle high compression loads.
From Industrial Hardware and Specialties InSpec line is the 3D-27E-F01 or the 75 Degree Obtuse (Open) Angle From Steel-E.G. (Zinc Plated) With 3-1/2 in. Leg And 4-Holes. Formely known as the 1F-27E-F-01 or 467975 this 75 Degree Obtuse (Open) Angle Fitting is designed to be used with all channel ( strut ). The 3D-253-C01 is constructed from steel, wiith an electro-galvanized zinc plating, and a dimension of 1-5/8" x 3-5/8" x 3-1/2". This 4-hole fitting is best suited for 1/2" bolts. The 75 Degree Obtuse (Open) Angle From Steel-E.G. (Zinc Plated) With 3-1/2 in. Leg And 4-Holes is equivlent to : G-STRUT G-320-10, UNISTRUT P2269, POWERSTRUT PS 781 75°, B-LINE B252, PHD 5349, HAYDON A-3194-10.
75 Degree Obtuse (Open) Angle From Steel-E.G. (Zinc Plated) With 3-1/2 in. Leg And 4-Holes
Vendor | InSpec |
---|---|
Old Part# | 1F-27E-F-01 |
Series | 467975 |
Catalog Page# | 18 |
Fitting Type | 75° Obtuse (Open) Angle 4-Hole |
For Use with | All Channel ( Strut ) |
Material/Finish (Mtrl/Fin) | Steel Electro-Galvanized (Zinc Plated) |
Hole Count ( Hole# ) | 4 |
Dimension | 1-5/8 x 3-5/8 x 3-1/2 |
Thickness | 1/4 |
Hole Size | 0.56 (9/16") |
Bolt Size | 0.50 (1/2") |
Distance (Hole ℄) | 1-7/8 |
B-LINE® | B252 |
G-STRUT® | G-320-10 |
HAYDON® | A-3194-10 |
PHD® | 5349 |
POWERSTRUT® | PS 781 75° |
UNISTRUT® | P2269 |