This is a demo store. No orders will be fulfilled.
7/16-20 UNF x 0.560 SwiftSert Threaded Insert For Metals - Carbon Steel 12L14 - Made in USA
The 7/16-20 UNF x 0.560 SwiftSert Threaded Insert For Metals - Carbon Steel 12L14 is a thin wall insert with pre-applied thread locking adhesive on the external threads of the insert. This American Made free-running insert has a 7/16-20 UNF Right-Hand internal thread and is 0.560 long. The inserts external thread is 9/16-12 Right-Hand UNC.
SHOPPERS IN CALIFORNIA, PLEASE NOTE:
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
7/16-20 UNF x 0.560 SwiftSert Threaded Insert For Metals - Carbon Steel 12L14
SwiftSertThin Wall inserts designed for applications where hole size is an issue, our thin wall solid threaded inserts offer all the advantages of our standard inserts with a smaller overall diameter. Manufactured from Carbon Steel 12L14, these self-locking inserts open immediately upon installation. The pre-applied LOCTITE on the external threads sets immediately allowing for the newly installed insert to be fastener ready. This American Made free-running insert has a 7/16-20 UNF Right-Hand internal thread and is 0.560 long. The inserts external thread is 9/16-12 Right-Hand UNC. Order today from Industrial Hardware and Specialties.
Features
- Ideal for applications where hole size is an issue
- All the advantages of the standard E-Z LOK threaded inserts in a smaller overall diameter
- Use standard tools for installation
- Self-locking preapplied LOCTITE adhesive activates on installation
- Vibration Resistant: adhesive secures the insert in place so it won't back out
Applications:
- Soft metals: aluminum, cast iron, magnesium, etc.
Installation:
Unlike helical inserts, which require a special tap and installation tool, SwiftSert threaded inserts for metal are installed using standard tools, and installation is as easy as 1-2-3.- Simply drill the correct sized hole with a standard drill
- Tap your hole with a standard tap
- Turn in the SwiftSert insert like an ordinary fastener with a screwdriver, bolt and jam nut, or a drive tool.
SwiftSert threaded inserts are self-locking and open immediately upon installation. The pre-applied adhesive on the external threads sets immediately allowing for the newly installed insert to be fastener ready.
SwiftSert solid wall threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or drive tool. When using a bolt and jam nuts for installation, the slotted end of the insert can be either up or down.
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering.
Application | Metals |
---|---|
Material | Carbon Steel 12L14 |
Insert Style | Free-Running |
Drive | Slotted |
ID Thread Rotation | Right-Hand |
ID Thread Standard | ANSI/ASME |
ID Acronym | UNF |
OD Thread Rotation | Right-Hand |
OD Thread Standard | ANSI/ASME |
OD Acronym | UNC |
Flange/Flush | Flush |
Wall Thickness | Thin Wall |
Inside Thread | 7/16-20 |
Length | 0.560 |
Drill Size | 0.5157 (33/64) |
Drill Size | 0.5157 (33/64) |
Plug Tap Size | 9/16-12 |
Decimal Outside Diameter | 0.5625 (9/16-12) |
Chrislynn Part Number | 9319-720 |