This is a demo store. No orders will be fulfilled.

Industrial Hardware and Specialties is classified as an ESSENTIAL business and is fully operational.

Please read our COVID-19 Message To Our Customers.

1/2-13 UNC x 0.625 Thin Wall Key-Locking Insert - Internal Locking - A286 Stainless

SKU
35L8C-7QJ0-50-05
$0.00
1/2-13 UNC x 0.625 Thin Wall Key-Locking Insert - Internal Locking - A286 Stainless is available to buy in increments of 5

The 1/2-13 UNC x 0.625 Thin Wall Key-Locking Insert - Internal Locking - A286 Stainless has locking keys that provide a positive mechanical lock which prevents rotation due to vibration or torsion. This American Made internal locking insert has a 1/2-13 UNC Right-Hand internal thread and is 0.625 long. The inserts external thread is 5/8-11 Right-Hand UNC.

Attributes

SHOPPERS IN CALIFORNIA, PLEASE NOTE:
WARNING: This product can expose you to lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

1/2-13 UNC x 0.625 Thin Wall Key-Locking Insert - Internal Locking - A286 Stainless


Key-Locking inserts with an Thin Wall Wall are designed to repair damaged threads or for use in original equipment. Manufactured from Stainless Steel Type A286, these Thin Wall inserts feature a key-locking action that prevents rotation due to vibration or torsion. This American Made internal locking insert has a 1/2-13 UNC Right-Hand internal thread and is 0.625 long. The inserts external thread is 5/8-11 Right-Hand UNC. Order today from Industrial Hardware and Specialties.

Features

  • Installed with standard drills and taps
  • May be used in a variety of materials: aluminum, magnesium, cold rolled stee
  • Passivated to enhance corrosion resistance and finish
  • Easy installation
  • Easy to remove

Applications:

  • Designed to repair damaged threads or for use in original equipment in soft metals.

Installation:

Drill out old threads with a standard drill. Tap new threads with a standard tap. Screw in the insert until slightly below surface. Drive keys down with several hammer taps on the proper installation tool.
More Information
ApplicationMetals
MaterialStainless Steel Type A286
Insert StyleInternal Locking
ID Thread RotationRight-Hand
ID Thread StandardANSI/ASME
ID AcronymUNC
OD Thread RotationRight-Hand
OD Thread StandardANSI/ASME
OD AcronymUNC
Flange/FlushFlush
Wall ThicknessThin Wall
Inside Thread1/2-13
Length0.625
Drill Size0.5782 (37/64)
Drill Size0.5782 (37/64)
Plug Tap Size5/8-11
Decimal Outside Diameter0.6250 (5/8-11)
Chrislynn Part Number79326